Configurasi Cisco Switch

Configurasi cisco switch catalyst 2900 saat pertma kali & cisco switch sama sekali belum mempunyai IP address :

— System Configuration Dialog —

At any point you may enter a question mark ‘?’ for help.

Use ctrl-c to abort configuration dialog at any prompt.

Default settings are in square brackets ‘[  ]‘.

Continue with configuration dialog? [yes/no]: y

Enter IP address: 192.168.1.1[ ip address cisco switch]

Enter IP netmask: 255.255.255.240[netmask cisco switch]

Would you like to enter a default gateway address? [yes]: y

IP address of default gateway: 192.168.1.14[gateway cisco switch]

Enter host name [jefrifm]: jefrifm [ hostname cisco switch]

The enable secret is a one-way cryptographic secret used

instead of the enable password when it exists.

Enter enable secret: qwerty [password cisco switch]

Would you like to configure a Telnet password? [yes]: y

Enter Telnet password: qwerty [ password untuk telnet]

Would you like to enable as a cluster command switch? [yes/no]: n

The following configuration command script was created:

ip subnet-zero

interface VLAN1

ip address 192.168.1.1 255.255.255.240

ip default-gateway 192.168.1.14

hostname jefrifm

enable secret 5 $1$.xB9$h8hX3EyUPvY9rIePD7Kq90

line vty 0 15

password qwerty

snmp community private rw

snmp community public ro

!

End

Use this configuration? [yes/no]: y

Building configuration…

[OK]

Use the enabled mode ‘configure’ command to modify this configuration.

Press RETURN to get started.

jefrifm#

atau bisa juga dengan perintah

jefrifm#configure

jefrifm(config)#interface VlAN 1

jefrifm(config-if)#ip address 192.168.1.1 255.255.255.240

jefrifm(config-if)#exit

jefrifm(config)#ip default-gateway 192.168.1.14

jefrifm(config)#end

jefrifm#copy running-config startup-config

jefrifm#